Powder coating equipment recovery effect is good
- Powder for powder coating equipment consists of fluidized bed tank, spray gun, spraying chamber and powder recovery section, powder recovery part adopts cyclone separator and bag type dust collector recycling way, cyclone separator and bag type dust collector reclaimed powder respectively by powder no. 1 and no. 2 powder pump to powder mixing device, and then by the no. 3 powder pump for powder fluidized bed box back. Powder coating spraying device for air pollution is greatly reduced, paint waste reduction, recycling effect is good. In the process of coating, coating in thermoplastic - cooling stage, the coating not sag, made the surface of the coating level off, smooth, no pinhole, and has excellent anti-corrosion performance and mechanical performance. Nano barium sulfate powder filling quantity can be as high as 50%, coating of cost-effective. PPS powder coating can be used as a heavy anti-corrosion coatings, such as oil well pipe coating on the reaction kettle, storage tank, chemical equipment such as tower section inside coating, etc.
- ÉÏһƪ£ºPowder mill characteristics
Next£ºSteel belt equipment under the condition of hardness of about 30 can be processed to meet the requir
ÖÐÎÄ
ENGLISH
